Industrial/Artisanal Building and Building Land - Vallefoglia (PU)

Industrial building in Ripatransone (AP), Locality San Rustico - LOT 2

The building is registered at Real Estate Registry of City of Ripatransone at sheet 53:

Parcel 465 – Sub 18 – Category D/7 - Cadastral Rent € 1,126.00

The property in question, located in an urbanized area located close to other artisanal and industrial activities which give the area a point of reference for the local market, develops along a completely flat valley located 8 kilometers from the A14 motorway exit of Grottammare and 10 kilometers from the Adriatica state road which can be reached directly along the Provincial Road n. 92 eastbound.

The unit is developed on the ground floor of a larger building, having a covered area of approximately 450.00 m2 of which 120.00 m2 used as offices and toilets with an internal height of mt. 3.00, the remaining m2 330.00 intended for a factory with internal height ml. 6.50.

The property is no longer occupied.

Please note the presence of remediable discrepancies.

For further information consult the appraisal and the attached documentation.

Industrial building in Ripatransone (AP), Locality San Rustico 35 - LOT 1

The building is registered at Real Estate Registry of City of Ripatransone at sheet 53:

Parcel 205 – Sub 18 – Category D/7

The property in question, located in an urbanized area located close to other artisanal and industrial activities which give the area a point of reference for the local market, develops along a completely flat valley located 8 kilometers from the A14 motorway exit of Grottammare and 10 kilometers from the state road Adriatica can be reached directly along the Provincial Road n. 92 eastbound.

The building, with a completely fenced area, can be divided into two distinct portions, the one facing the road located parallel to Provincial Road no. 92 and the warehouse built in several phases and the result of expansions.

The street side portion is a rectangular reinforced concrete structure, which is spread over three floors above ground, the first ground floor largely intended for the display of furniture and the offices of the interior designers, the first floor, with both external and internal, intended for the administrative sector and appropriately divided with equipped walls, the second floor of variable internal height, intended for archive, test room and warehouses.

The ground floor, of approximately 5,600 m2 and detached accessories for approximately m2. 180, is divided as follows: Entrance sqm. 50, exhibition rooms with sales boxes, bathrooms and changing rooms sqm. 1,140, furniture/finished product storage m2 650, laboratories/warehouses m2 3,020, finished product load m2 460, painting rooms sqm 150, CNEL cabins, power plants, compressor rooms sqm. 130., completely painted, with aluminum frames and shatterproof glass. The systems were also adapted and overhauled to provide the exhibition room with the necessary light.

The first floor of 412 m2 is intended for offices and has been divided with equipped walls in aluminum and glass, with carpeted floors, the walls are painted, the fixtures are in aluminium. The first floor has a balcony with iron railings on the south and east sides.

The second floor has a surface area of 415 m2 and can be reached from the internal staircase connecting all floors, and is intended for archives and a rehearsal room. The internal heights vary from 1.95 m. at 3.95 m. and part of the floor has been divided with equipped walls which are well lit and ventilated.

The three floors are also connected by a lift/hoist.

The roofing is made of asbestos-cement sheets (eternit).

Please note the presence of non-remediable discrepancies for which the state of the places will have to be restored. The other discrepancies can be sanated.

At present, a portion of the property measuring approximately 727.00 sqm it is still leased, with regular rental contract dated 04/10/2014. Following the takeover of the Bankruptcy Receivership in this lease contract, its expiry was effectively extended to 05/10/2026 but, through a supplementary agreement signed by the parties, a termination clause was introduced for the lease at the time of the building awarding.

For further information consult the appraisal and the attached documentation.

Industrial building in Ripatransone (AP), Località San Rustico - LOT 3

The building is registered at Real Estate Registry of City of Ripatransone at sheet 53:

Parcel 465 – Sub 34 – Category D/7

The property in question, located in an urbanized area located close to other artisanal and industrial activities which give the area a point of reference for the local market, develops along a completely flat valley located 8 kilometers from the A14 motorway exit of Grottammare and 10 kilometers from the Adriatica state road which can be reached directly along the Provincial Road n. 92 eastbound.

The unit is developed on the ground floor of a larger building, having a covered area of approximately 450.00 m2 and an internal height of 6.50 meters.

The property is no longer occupied.

Please note the presence of remediable discrepancies.

For further information consult the appraisal and the attached documentation.

OFFERS GATHERING - Industrial building in Nocera Umbra (PG), Località Gaifana, SP 271 - COMPLETE LOT

The building is registered at Real Estate Registry of City of Nocera Umbra at sheet 18:
Parcel 324 - Sub. 11 - Category D/01 - Cadastral Rent € 454,136.00
Parcel 324 - Sub. 7 - Category A/3 - Class 3 - Consistency 6 compartments - Cadastral Rent € 325.37

The building is registered at Land Registry of City of Nocera Umbra at:
sheet 18 - Parcels 569  - 490 - 564 - 1001 - 1003 - 1005 - 1007 - 1008 - 1009 - 1011 - 1012 - 1014 - 1015 - 1016 - 1018 - 1019 - 1020 - 1021 - 1023 - 1024 - 1025 - 1027 - 1376 -1115
sheet 35 - Parcels  350 - 352

Industrial building located in the immediate vicinity of the expressway in Variante alla Flaminia (ex .SSn°3), 2 km away from the Colle–Gaifana junction.
The building was built in various periods in succession starting from 1982 up to the last extension in 2002.
The construction system in concrete cast on site for the part in elevation, while the roof was made with shed type tiles of c.a.p.
The infill panels were placed in concrete block masonry, with partly sliding metal and polycarbonate window frames above; there is an industrial-type flooring in all areas except for the offices which were made of marble.

The complex is equipped with all the technological and procurement infrastructures, preparatory to both the production cycle and human presence.
 There are REI compartments and other protection and prevention devices to provide the necessary safety in the presence of workers; the same applies to waste water discharges, emissions etc.
In detail, the structure was set up with discontinuous foundations, such as a plinth cast on site connected to the ground by bored piles (diam.80cm) cast on site, joined together with connecting curbs in reinforced concrete cast on site. The regular mesh pilaster is articulated in a homogeneous way, of dimensions cm. 60 by 110 with a height of 8 metres, on which double T-shaped beams support the prefabricated roof; called horizontal elements
height of 200 cm, limiting the internal height to 7.50 meters from the intrados of the beam to the finished floor.
While the part obtained in the orthogonal span, from the extrados to the intrados of the same, in fact constitutes the Technical Volume suitable for housing various overhead cranes with a capacity of 25 tons.
The roof made with prefabricated elements in HPV type prestressed reinforced concrete resting on –Selle- in reinforced concrete by means of a hinged connection.

Building land of the surface of 3,670 sq m.
The land according to the General Regulatory Plan (Table OP.3.F3), of the Municipality of Nocera Umbra adopted with the Resolution of the Municipal Council of 12/30/2020 published on the institutional website of the Municipality of Nocera Umbra, is included in:
- Homogeneous Zone B2 "Ambiti of the existing consolidated predominantly residential settlements to be conserved, transformed and completed.
- Fabrics of Medium Density Urban Areas” for which the standard IUF (construction index) is 0.30m2/m2.
Approximately 1,100 m2 of gross usable area can be built to be used as a residence.

For further information consult attached appraisal and documention.

The gathering will be done using the following modes:

All bidders, except the subjects by law not allowed to take part in the gathering, after having joined the site www.gobidreal.it, will fill in the offer form (published online) and send it undersigned for acceptance of the conditions proposed, at the following address f54.2020ancona@pecfallimenti.it in conjunction with the documents required.

Please check Sale Notice and specific conditions for further information concerning participation.

OFFERS GATHERING - Industrial building in Nocera Umbra (PG), Locality Gaifana, SP 271 - LOT 1

The building is registered at Real Estate Registry of City of Nocera Umbra at sheet 18:

Parcel 324 - Sub 11 - Category D/01 - Cadastral Rent € 454,136.00
Parcel 324 - Sub 7 - Category A/3 - Class 3 - Consistency 6 compartments - Cadastral Rent € 325.37

The portion of the property is part of the larger industrial complex described below:

Industrial building located in the immediate vicinity of the expressway in Variante alla Flaminia (ex .SSn°3), 2 km away from the Colle–Gaifana junction.
The building was built in various periods in succession starting from 1982 up to the last extension in 2002.
The construction system in concrete cast on site for the part in elevation, while the roof was made with shed type tiles of c.a.p.
The infill panels were placed in concrete block masonry, with partly sliding metal and polycarbonate window frames above; there is an industrial-type flooring in all areas except for the offices which were made of marble.

The complex is equipped with all the technological and procurement infrastructures, preparatory to both the production cycle and human presence.
There are REI compartments and other protection and prevention devices to provide the necessary safety in the presence of workers; the same applies to waste water discharges, emissions etc.
In detail, the structure was set up with discontinuous foundations, such as a plinth cast on site connected to the ground by bored piles (diam.80cm) cast on site, joined together with connecting curbs in reinforced concrete cast on site. The regular mesh pilaster is articulated in a homogeneous way, of dimensions cm. 60 by 110 with a height of 8 metres, on which double T-shaped beams support the prefabricated roof; called horizontal elements
height of 200 cm, limiting the internal height to 7.50 meters from the intrados of the beam to the finished floor.
While the part obtained in the orthogonal span, from the extrados to the intrados of the same, in fact constitutes the Technical Volume suitable for housing various overhead cranes with a capacity of 25 tons.
The roof made with prefabricated elements in HPV type prestressed reinforced concrete resting on –Selle- in reinforced concrete by means of a hinged connection.

Sub 7 represents the caretaker's/concierge lodge which will be co-owned with the remaining portions of the industrial building.

For further information consult attached appraisal and documention.

The gathering will be done using the following modes:

All bidders, except the subjects by law not allowed to take part in the gathering, after having joined the site www.gobidreal.it, will fill in the offer form (published online) and send it undersigned for acceptance of the conditions proposed, at the following address f54.2020ancona@pecfallimenti.it in conjunction with the documents required.

Please check Sale Notice and specific conditions for further information concerning participation.

OFFERS GATHERING - Industrial building in Nocera Umbra (PG), Località Gaifana, SP 271 - LOT 2

The building is registered at Real Estate Registry of City of Nocera Umbra at sheet 18:

Parcel 324 - Sub. 11 - Category D/01 - Cadastral Rent € 454,136.00
Parcel 324 - Sub. 7 - Category A/3 - Class 3 - Consistency 6 compartments - Cadastral Rent € 325.37

The portion of the property is part of the larger industrial complex described below:

Industrial building located in the immediate vicinity of the expressway in Variante alla Flaminia (ex .SSn°3), 2 km away from the Colle–Gaifana junction.
The building was built in various periods in succession starting from 1982 up to the last extension in 2002.
The construction system in concrete cast on site for the part in elevation, while the roof was made with shed type tiles of c.a.p.
The infill panels were placed in concrete block masonry, with partly sliding metal and polycarbonate window frames above; there is an industrial-type flooring in all areas except for the offices which were made of marble.

The complex is equipped with all the technological and procurement infrastructures, preparatory to both the production cycle and human presence.
There are REI compartments and other protection and prevention devices to provide the necessary safety in the presence of workers; the same applies to waste water discharges, emissions etc.
In detail, the structure was set up with discontinuous foundations, such as a plinth cast on site connected to the ground by bored piles (diam.80cm) cast on site, joined together with connecting curbs in reinforced concrete cast on site. The regular mesh pilaster is articulated in a homogeneous way, of dimensions cm. 60 by 110 with a height of 8 metres, on which double T-shaped beams support the prefabricated roof; called horizontal elements
height of 200 cm, limiting the internal height to 7.50 meters from the intrados of the beam to the finished floor.
While the part obtained in the orthogonal span, from the extrados to the intrados of the same, in fact constitutes the Technical Volume suitable for housing various overhead cranes with a capacity of 25 tons.
The roof made with prefabricated elements in HPV type prestressed reinforced concrete resting on –Selle- in reinforced concrete by means of a hinged connection.

Sub 7 represents the caretaker's/concierge lodge which will be co-owned with the remaining portions of the industrial building.

For further information consult attached appraisal and documention.

The gathering will be done using the following modes:

All bidders, except the subjects by law not allowed to take part in the gathering, after having joined the site www.gobidreal.it, will fill in the offer form (published online) and send it undersigned for acceptance of the conditions proposed, at the following address f54.2020ancona@pecfallimenti.it in conjunction with the documents required.

Please check Sale Notice and specific conditions for further information concerning participation.

OFFERS GATHERING - Industrial building in Nocera Umbra (PG), Località Gaifana, SP 271 - LOT 3

The building is registered at Real Estate Registry of City of Nocera Umbra at sheet 18:
Parcel 324 - Sub. 11 - Category D/01 - Cadastral Rent € 454,136.00
Parcel 324 - Sub. 7 - Category A/3 - Class 3 - Consistency 6 compartments - Cadastral Rent € 325.37

The building is registered at Land Registry of City of Nocera Umbra at:
sheet 18 - Parcel 1012 - 1014 - 1015 - 1018 - 1019 - 1020 - 1023 - 1024 - 1027 - 569 - 350 -352

The portion of the property is part of the larger industrial complex described below:

Industrial building located in the immediate vicinity of the expressway in Variante alla Flaminia (ex .SSn°3), 2 km away from the Colle–Gaifana junction.
The building was built in various periods in succession starting from 1982 up to the last extension in 2002.
The construction system in concrete cast on site for the part in elevation, while the roof was made with shed type tiles of c.a.p.
The infill panels were placed in concrete block masonry, with partly sliding metal and polycarbonate window frames above; there is an industrial-type flooring in all areas except for the offices which were made of marble.

The complex is equipped with all the technological and procurement infrastructures, preparatory to both the production cycle and human presence.
There are REI compartments and other protection and prevention devices to provide the necessary safety in the presence of workers; the same applies to waste water discharges, emissions etc.
In detail, the structure was set up with discontinuous foundations, such as a plinth cast on site connected to the ground by bored piles (diam.80cm) cast on site, joined together with connecting curbs in reinforced concrete cast on site. The regular mesh pilaster is articulated in a homogeneous way, of dimensions cm. 60 by 110 with a height of 8 metres, on which double T-shaped beams support the prefabricated roof; called horizontal elements
height of 200 cm, limiting the internal height to 7.50 meters from the intrados of the beam to the finished floor.
While the part obtained in the orthogonal span, from the extrados to the intrados of the same, in fact constitutes the Technical Volume suitable for housing various overhead cranes with a capacity of 25 tons.
The roof made with prefabricated elements in HPV type prestressed reinforced concrete resting on –Selle- in reinforced concrete by means of a hinged connection.

Sub 7 represents the caretaker's/concierge lodge which will be co-owned with the remaining portions of the industrial building.

For further information consult attached appraisal and documention.

The gathering will be done using the following modes:

All bidders, except the subjects by law not allowed to take part in the gathering, after having joined the site www.gobidreal.it, will fill in the offer form (published online) and send it undersigned for acceptance of the conditions proposed, at the following address f54.2020ancona@pecfallimenti.it in conjunction with the documents required.

Please check Sale Notice and specific conditions for further information concerning participation.

OFFERS GATHERING - Industrial building in Nocera Umbra (PG), Località Gaifana, SP 271 - LOT 4

The building is registered at Real Estate Registry of City of Nocera Umbra at sheet 18:
Parcel 324 - Sub. 11 - Category D/01 - Cadastral Rent € 454,136.00
Parcel 324 - Sub. 7 - Category A/3 - Class 3 - Consistency 6 compartments - Cadastral Rent € 325.37

The building is registered at Land Registry of City of Nocera Umbra at:
Sheet 18 - Parcel 1001 - 1025 - 1003 - 1005 - 1007 - 1008 - 1009 - 1016 - 1011 - 1021 - 1027 - 569 - 350 -352

The portion of the property is part of the larger industrial complex described below:

Industrial building located in the immediate vicinity of the expressway in Variante alla Flaminia (ex .SSn°3), 2 km away from the Colle–Gaifana junction.
The building was built in various periods in succession starting from 1982 up to the last extension in 2002.
The construction system in concrete cast on site for the part in elevation, while the roof was made with shed type tiles of c.a.p.
The infill panels were placed in concrete block masonry, with partly sliding metal and polycarbonate window frames above; there is an industrial-type flooring in all areas except for the offices which were made of marble.

The complex is equipped with all the technological and procurement infrastructures, preparatory to both the production cycle and human presence.
There are REI compartments and other protection and prevention devices to provide the necessary safety in the presence of workers; the same applies to waste water discharges, emissions etc.
In detail, the structure was set up with discontinuous foundations, such as a plinth cast on site connected to the ground by bored piles (diam.80cm) cast on site, joined together with connecting curbs in reinforced concrete cast on site. The regular mesh pilaster is articulated in a homogeneous way, of dimensions cm. 60 by 110 with a height of 8 metres, on which double T-shaped beams support the prefabricated roof; called horizontal elements
height of 200 cm, limiting the internal height to 7.50 meters from the intrados of the beam to the finished floor.
While the part obtained in the orthogonal span, from the extrados to the intrados of the same, in fact constitutes the Technical Volume suitable for housing various overhead cranes with a capacity of 25 tons.
The roof made with prefabricated elements in HPV type prestressed reinforced concrete resting on –Selle- in reinforced concrete by means of a hinged connection.

Sub 7 represents the caretaker's/concierge lodge which will be co-owned with the remaining portions of the industrial building.

For further information consult attached appraisal and documention.

The gathering will be done using the following modes:

All bidders, except the subjects by law not allowed to take part in the gathering, after having joined the site www.gobidreal.it, will fill in the offer form (published online) and send it undersigned for acceptance of the conditions proposed, at the following address f54.2020ancona@pecfallimenti.it in conjunction with the documents required.

Please check Sale Notice and specific conditions for further information concerning participation.

OFFERS GATHERING - Industrial building in Nocera Umbra (PG), Località Gaifana, SP 271 - LOT 5

The building is registered at Real Estate Registry of City of Nocera Umbra at sheet 18:
Parcel 324 - Sub. 11 - Category D/01 - Cadastral Rent € 454,136.00
Parcel 324 - Sub. 7 - Category A/3 - Class 3 - Consistency 6 compartments - Cadastral Rent € 325.37

The building is registered at Land Registry of City of Nocera Umbra at:
Sheet 18 - Parcel 1027 - 569 - 350 -352 - 1376

The portion of the property is part of the larger industrial complex described below:

Industrial building located in the immediate vicinity of the expressway in Variante alla Flaminia (ex .SSn°3), 2 km away from the Colle–Gaifana junction.
The building was built in various periods in succession starting from 1982 up to the last extension in 2002.
The construction system in concrete cast on site for the part in elevation, while the roof was made with shed type tiles of c.a.p.
The infill panels were placed in concrete block masonry, with partly sliding metal and polycarbonate window frames above; there is an industrial-type flooring in all areas except for the offices which were made of marble.

The complex is equipped with all the technological and procurement infrastructures, preparatory to both the production cycle and human presence.
There are REI compartments and other protection and prevention devices to provide the necessary safety in the presence of workers; the same applies to waste water discharges, emissions etc.
In detail, the structure was set up with discontinuous foundations, such as a plinth cast on site connected to the ground by bored piles (diam.80cm) cast on site, joined together with connecting curbs in reinforced concrete cast on site. The regular mesh pilaster is articulated in a homogeneous way, of dimensions cm. 60 by 110 with a height of 8 metres, on which double T-shaped beams support the prefabricated roof; called horizontal elements
height of 200 cm, limiting the internal height to 7.50 meters from the intrados of the beam to the finished floor.
While the part obtained in the orthogonal span, from the extrados to the intrados of the same, in fact constitutes the Technical Volume suitable for housing various overhead cranes with a capacity of 25 tons.
The roof made with prefabricated elements in HPV type prestressed reinforced concrete resting on –Selle- in reinforced concrete by means of a hinged connection.

Sub 7 represents the caretaker's/concierge lodge which will be co-owned with the remaining portions of the industrial building.

For further information consult attached appraisal and documention.

The gathering will be done using the following modes:

All bidders, except the subjects by law not allowed to take part in the gathering, after having joined the site www.gobidreal.it, will fill in the offer form (published online) and send it undersigned for acceptance of the conditions proposed, at the following address f54.2020ancona@pecfallimenti.it in conjunction with the documents required.

Please check Sale Notice and specific conditions for further information concerning participation.

OFFERS GATHERING - Industrial building in Nocera Umbra (PG), Località Gaifana, SP 271 - LOT 6

The building is registered at Real Estate Registry of City of Nocera Umbra at sheet 18:
Parcel 324 - Sub. 11 - Category D/01 - Cadastral Rent € 454,136.00
Parcel 324 - Sub. 7 - Category A/3 - Class 3 - Consistency 6 compartments - Cadastral Rent € 325.37

The portion of the property is part of the larger industrial complex described below:

Industrial building located in the immediate vicinity of the expressway in Variante alla Flaminia (ex .SSn°3), 2 km away from the Colle–Gaifana junction.
The building was built in various periods in succession starting from 1982 up to the last extension in 2002.
The construction system in concrete cast on site for the part in elevation, while the roof was made with shed type tiles of c.a.p.
The infill panels were placed in concrete block masonry, with partly sliding metal and polycarbonate window frames above; there is an industrial-type flooring in all areas except for the offices which were made of marble.

The complex is equipped with all the technological and procurement infrastructures, preparatory to both the production cycle and human presence.
There are REI compartments and other protection and prevention devices to provide the necessary safety in the presence of workers; the same applies to waste water discharges, emissions etc.
In detail, the structure was set up with discontinuous foundations, such as a plinth cast on site connected to the ground by bored piles (diam.80cm) cast on site, joined together with connecting curbs in reinforced concrete cast on site. The regular mesh pilaster is articulated in a homogeneous way, of dimensions cm. 60 by 110 with a height of 8 metres, on which double T-shaped beams support the prefabricated roof; called horizontal elements
height of 200 cm, limiting the internal height to 7.50 meters from the intrados of the beam to the finished floor.
While the part obtained in the orthogonal span, from the extrados to the intrados of the same, in fact constitutes the Technical Volume suitable for housing various overhead cranes with a capacity of 25 tons.
The roof made with prefabricated elements in HPV type prestressed reinforced concrete resting on –Selle- in reinforced concrete by means of a hinged connection.

Sub 7 represents the caretaker's/concierge lodge which will be co-owned with the remaining portions of the industrial building.

For further information consult attached appraisal and documention.

The gathering will be done using the following modes:

All bidders, except the subjects by law not allowed to take part in the gathering, after having joined the site www.gobidreal.it, will fill in the offer form (published online) and send it undersigned for acceptance of the conditions proposed, at the following address f54.2020ancona@pecfallimenti.it in conjunction with the documents required.

Please check Sale Notice and specific conditions for further information concerning participation.

Building for sale in Montecarotto (AN), via Primo Maggio n. 2

The property is registered at Real Estate Registry of City of Piacenza at sheet 23

PARCEL 181 - CATEGORY D/1 - CADASTRAL RENT EUR 6,804.84

Industrial building distributed partly on ground floor and partly on two floors, has an office area and is equipped with a private court for parking and truck maneuvering.

From entrance hall you can access office rooms, from a stairway accessible from corridor you can access the lower floor where there are dressing rooms, canteen and storage, beyond which are reachable two laboratory areas, production area and warehouse. Largest laboratory and warehouse are equipped with two gates to outside service area for loading and unloading.

For further information consult attached appraisal

EXPRESSION OF INTEREST GATHERING - Industrial buildings with home and offices annexed in Ascoli Piceno, Locality Castagneti, Basso Marino Industrial Area - LOT 1

The Buildings are registered at the Real Estate Registry of City of Ascoli Piceno at sheet 79:

Parcel 113 – Sub 2 – Area 3 – Category D/7 – Cadastral Rent € 5.068,72
Parcel 113 – Sub 3 – Area 3 – Category A/2 – Class 2 – Consistency 8.5 compartments – Cadastral Rent € 375,34
Parcel 113 – Sub 5 – Area 3 – Category D/7 – Cadastral Rent € 36,77

The properties are located in the Basso Marino industrial area, in the municipality of Ascoli Piceno, a fully urbanized area characterized by prefabricated structures destinated to the production-industrial use.
The rectangular-shaped shed has an area of ​​2,060 square meters. A portion of the property is intended for storage, the flooring in this area is in concrete, in the portion used as a production area the flooring is in concrete with quartz finish.
The dressing rooms and the electrical cabin are located independently of the shed.
There is only the lighting system. The conservative state is mediocre.

Facing the factory there is the property, on two levels, intended for home, offices and warehouse.
The warehouse and office area are located on the ground floor and have a total area of ​​187 sqm. There is also a small thermal power plant.
The house is located on the first floor, which can be accessed by an internal staircase or an external staircase.

All the properties have in common an exclusive 1,403.00 sq m courtyard used for parking and transit vehicles.

For further information consult the appraisal and the attached documentation

The gathering will be done using the following modes:

All bidders, except the subjects by law not allowed to take part in the gathering, after having joined the site www.gorealbid.it, will fill in the offer form (published online) and send it undersigned for acceptance of the conditions proposed, at the following address gorealbid@pec.it in conjunction with the documents required.

For participation modalities further information consult attached Sale Notice